|
Custom Sized Top Sealing
Fireplace Chimney Dampers
Made to fit... 17 common flue sizes,
odd size & oval flues, flush flue applications
and the popular " there is no flue, its just a hole "
 |
The all stainless steel CHIM-A-LATOR ® easily mounts on top of a masonry fireplace
flue and is operated by a convenient, adjustable regulator installed on the side
wall of the fireplace.
It is far more efficient than conventional cast iron
dampers and the ideal replacement for old defective dampers. |
Detailed Pictures |
Proven
for over 30 years to be the most trouble free top sealing damper.
- 100% Stainless Steel
- Satisfaction Guaranteed. If within 30 days, you
are not fully satisfied return the CHIM-A-LATOR® for a full refund.
- Lifetime Warranty, best on the market today.
- Fast Installation Comes fully assembled for fast and easy
"bolt to flue" installation.
- Chimney Fire Tested with little or no damage to unit. Will not fall
and close flue in event of a chimney fire.
- Saves Energy tight seal on top of the chimney, keeps heat in when
fireplace is not in use.
- 17 Standard Sizes
- Six Setting Regulator controls the amount of draft to produce more
heat when burning.
- Prevents Down Draft Smoking caused by wind.
- Keeps Out Animals, birds, insects, bees, rain, leaves, wind and
airplane noise.
Call 1-800-685-8263 or e-mail us at
info@volko.com
Additional Options...
Smaller 5/8"
Spark Arrestor Mesh
Round, Oval,
Square, Rectangular & Custom CHIM-A-LATOR Bases
( also
used for chimneys with no flue and flush flue applications
)
Black Color
Option ( Powder Coat Black over Stainless Steel )
| Custom Combination
Fireplace Cap-Damper Damper Opens 6.5"
Easy " Bolt-On " Flue Installation
Removable Handle ...
Six Setting Regulator is installed within the firebox on either side.
Removable handle extends past the opening to allow damper setting even
during a fire. Control the amount of draft to one of the 6 settings to produce more
heat when burning and remove handle to close a spark screen or glass doors.
|
Detailed Pictures |
Call 1-800-685-8263 or e-mail us at
info@volko.com
CHIM-A-LATOR®
Ordering Instructions
 |
Measure
OUTSIDE of Flue Tile. Use chart on left & visit the installation page to order proper
size.
Each size of CHIM-A-LATOR® has 2.25 inches of adjustment.
Measure Height of Flue Tile Extending Out of Chimney.
If this
measurement is less than 1.25 inches, you will need a
flue extension. |
Detailed Pictures |
Estimate Length of Flue..... If longer than 30 ft. order longer cable when
ordering a
CHIM-A-LATOR ®
Note.. if chimney has an Offset at Top of Flue. CHIM-A-LATOR ®
is shipped
with 7 ft. of cable casing to protect cable at rub points. If offset is
higher than 7 ft. order a longer piece.
Designed Not to Fall
Down In the Event
of a Chimney Fire!
Call 1-800-685-8263 or e-mail us at
info@volko.com
| 
